EN CN
 

Product

Home > Product > PEEK SPECIAL GRADES

PEEK GRADES

PEEK SPECIAL GRADES

PEI GRADES

PSU

PPS

MACHINED PARTS

Carbon Filled PEEK
JUTAIPEEK®CF30 is a type of Polymeric Profiles made from 30% of short-cut Carbon Fiber Reinforced Polyetherether Ketone (PEEK). The raw material of JUTAIPEEK®CF30V is British Victrex (Victrex PEEK Polymer 450CA30), The raw materials of JUTAIPEEK®CF30G are domestic raw materials. Compared to PEEK reinforced by GF30, the HDT increases obviously, and it has better wear-resistance. In addition, it is electrical and heat conducting.

This type of products can be applied in the operating condition that is need to bear larger mechanical stress and wear rate in higher temperature, such as semiconductor production process, precision bearing, tubes and components in chemical equipment.
Product Features
JUTAIPEEK®CF30 type Carbon Fiber Reinforced PEEK profiles:
● Good tensile performance, and Tensile Modulus=6GPa.
● Good flexural performance, and Flexural Modulus≥6GPa.
● Outstanding thermal mechanical bearing capacity, and HDT≥280℃.
● Outstanding wear-resistance.
● Good heat conducting property.
● Good electrical conducting property.
● Excellent dimensional stability and low thermal expansion.
● High thermal endurance and the long service temperature is 250℃.
Application Fields
JUTAIPEEK®CF30 type Carbon Fiber Reinforced PEEK profiles can be applied:
—— Mechanical Engineering Industry；
—— Semiconductor and Electronic Industry；
—— Chemical Industry and Petrochemical Industry.
Instructions for Use
Machined by Lathes or Milling Machine.
Remove surface heat-treatment aged layers and the thickness of removal layer is 0.5-1mm.
Product Storage Instructions
Placed away from light, avoiding humid, and away from oily substance.
Packed with polymeric film when not use.
Product Technical Data
The performance of JUTAIPEEK®CF30 series products is as follows:

Performance Test Method Unit CF30G CF30V
Color Eye / Black Black
Density ISO 1183-1 g/cm³ 1.40 1.40
Tensile Strength ISO 527-2 MPa ≥100 ≥110
Tensile Modulus ISO 527-2 GPa ≥5 ≥6
Elongation At Break ISO 527-2 % ≥5 ≥7
Charpy Impact Strength ISO 179 KJ/m² ≥3 ≥7
Flexural Strength ISO 178 MPa ≥195 ≥200
Flexural Modulus ISO 178 GPa ≥6 ≥6.5
Rockwell Hardness ISO 2039-2 HRM ≥100 ≥100
Melt Temperature ISO 11357-3 ℃ ≥334 ≥334
Thermal Conductivity ISO 8302 W/ (m•K) 0.9-1.0 0.9-1.0
Coefficient of Linear Thermal Expansion 20-100℃ ISO 11359-2 10-6/K ≤30 ≤30
Long Service Temperature UL 746B ℃ 250 250
Heat Deflection Temperature ISO 75-2 ℃ ≥280 ≥280
Water Absorption （24h） ISO 62 % ≤0.1 ≤0.1
Flame Retardancy UL 94 / V-0 V-0
Volume Resistivity IEC 61340-2-3 Ω•cm 102-106 102-106
Menu Tel Contact